How to fix, Mac won’t turn on issue?

Apple devices are meticulously developed but they are not immune to problems. Our techies get so many apple owners reaching out to them with boot-up issues. We get calls for the device is not booting up, getting stuck in a boot loop or at times simply not turning on. Sometimes power button on their Apple laptop is not responding at all, the cause behind this problem may be a software failure or a crash file. In this page, we have listed some methods that help you to fix the issue and turn on your device. If you don’t think you’re the right person to fix the problem, you can take an expert’s advice on Apple Repair Center.

Method 1: Ensure it has power

Make sure your laptop is entirely charged. Put your laptop to a power source and leave for an hour. There may be a case, that charging cable is damaged. Check the cable properly and if it is torn, replace it with a new cable.

Method 2: Check the Hardware

·         If you’re using a desktop, kindly ensure all the cables are plugged incorrectly. Additionally, remover all the cables and put them again- this will ensure they’re securely connected to your device.

·         In case, you have recently opened your device to fix any hardware that could have caused the problem. You might have forgotten to close the hardware appropriately. Plug your laptop’s batter accurately and lock it by sliding the tab.

Method 3: Perform a power cycle

·         If your laptop battery is removable, remove it and after that press the power button for about 15 seconds. This will forcibly cut the power to your system and force it to restart.

·         Insert the battery to your device and put your laptop to charge and press the power button.

Method 4: Reset the system management controller Firmware

·         If you have tried all the possible way to fix the snag but none of them work great for you, this time you need to reset your System management controller firmware. This is the last option left to fix the snag persisting in your device.

·         On your Apple laptop unplug your device from the power source and remove the battery. Press and hold the power button for about 5 seconds. Release the button, reinsert the battery and plug your device to the power.

·         On irremovable battery laptops, plug the power cable; press the Shift – Command – option keys and power button simultaneously.  Press and release all the four keys and then press the power button as you normally do to turn on your device.